Phonic i7200 XrossTech, User Manual

Page: 11 / 16

I7200 USER
’
S MANUAL PHONIC CORPORATION Page 11
Using a Subwoofer
When in 3-way mono, it is possible to connect a sub-
woofer to the extra output, unused in the typical High,
Mid and Low output con
fi guration. To do this, fi rst set the
device to 3-way mono. By repeatedly pressing the OUT
GAIN jog wheel in, the i7200 will alternate between the
Low, Mid, High, and eventually Sub indicators. When
the Sub indicator is illuminated, you can then rotate the
XOVER/EDIT jog wheel to select the cut off frequency
between 25 Hz and 250 Hz and press the jog wheel to
fi nalize your selection. All frequencies below the selected
cut off will be sent to the Sub output. You are also able
to adjust the Output Gain of this level. To do so, simply
turn the OUT GAIN control.
Recalling and Saving Presets
By fi rst pressing the Preset Key, you are able to use the
XOVER/EDIT jog wheel to select the factory preset, as
well as select from sixty of your own personally stored
presets. To store your own settings,
fi rst set all the
properties of the i7200 to your needs. Once you have
completed your settings, press the Store Key, which will
cause the LCD screen to show U 1 (User Preset slot 1).
You can then use the XOVER jog wheel to choose from
U 1 to U 60 and click the XOVER jog wheel to save in the
chosen slot. You are then able to change your settings
and recall the previously saved settings at any time. The
convenience of having your settings saved in the device
frees you from having to spend time adjusting properties
each time you use it.
If you recall a preset with a different channel setting than
you are currently using (eg. If you are in Stereo Mode
and choose a Mono preset) a mute of all channels will
activate immediately to protect speakers from receiving
the incorrect frequency ranges.
NB.
When recalling presets, the XOVER/EDIT jog wheel must be pushed
to con fi rm your setting.
Auto Saving Settings
If the controls of the i7200 are not used for a ten second
period, the system will automatically save your current
settings, which will be stored and kept even after the
device is turned off. This ensures no settings are lost in
the event of power outages.
Locking the i7200
By pressing any two of the jog wheels located on the
front of the i7200 simultaneously you enable a key lock
that will stop any settings from being accidentally altered
while the device is in use. To disable this lock, once again
press any two jog wheels.