Phonic GEQ1500, User Manual

Page: 4 / 20

4 GEQ1500 / GEQ3100
INTRODUCTION
Congratulations on your purchase of another great product from
Phonic. The GEQ 1500 and 3100 Graphic Equalizers are both
stylish and intelligent. As far as entry-level graphic equalizers go,
you won’t find a more reliable and easy-to-use EQ. Made with
high quality components, including super-smooth potentiometer
sliders and internal torodial transformer, this is the ideal equalizer
to take on tour, or to be installed in any live venue.
We understand that you’re eager to use this unit; however we
strongly suggest reading this user’s guide to make full use of this
equalizer’s functions. After carefully reading this manual, please
store it in a place that is easy to find in future, in case there’s
something you missed the first time around.
FEATURES
● GEQ1500 – Two 15-band, 2/3-octave Constant Q frequency
bands
● GEQ3100 – Two 31-band, 1/3-octave Constant Q frequency
bands
● Switchable boost/cut ranges of ±6 or ±12 dB
● 12 dB per octave 50Hz low-cut filter
●
Front-panel bypass switch
● ±15 dB input gain range
● 4-segment LED meter for monitoring output levels
● XLR and TRS Inputs and Outputs
● Internal Toroidal Transformer
● Frequency Response of <10Hz to >50kHz
● Dynamic range greater than 108dB
Quick Installation
1. Make sure your GEQ is off. Preferably remove the AC power
cable.
2. Connect all of your required output devices to the GEQ’s inputs.
If it’s a stereo device, use both of the GEQ’s channels. If you’re
using a mono signal, simply use a single channel. The other
channel will then be free for a second mono signal.
3.
Connect all of your required input devices to the GEQ’s output
connectors. This may include amplifiers or mixers (if you’re
using an insert point).
4. Turn your devices on in this order: instruments, mixer, signal
processors, amps/speakers.