7
AM642D / AM642DP / AM642D USB
English
36. Main L/R and Group 1-2 Buttons
The EFX Return control is accompanied by Main L/
Rand Group 1-2 buttons. These buttons change the
destination of the EFX Return signal between the
Main L/R signal and/or Group 1-2 sub mix.
37. Return Solo Buttons
Pushing either of the Return Solo buttons allows
users to send the signal from the AUX Returns 1
and/or 2 to the Control Room / Phones mixing bus.
38. AUX Send Master Control
This control adjusts the final level of the AUX mixing
bus (as taken from the AUX level controls on each
channel strip), the audio of which is sent to AUX Send
output. The corresponding SOLO button allows you
to send the AUX Send signal to the Control Room /
Phones mixing bus. The AM642D mixers feature 3
sends, where the first is in fact a 60mm fader, rather
than the simple rotary control. Also incorporated with
the AUX 1 control of the AM642D mixers is a Peak
LED, as well as an ON button and indicator, allowing
AUX 1 to be activated and muted when required.
Activation of AUX Send 1 is, of course, accompanied
by an illuminated LED.
39. EFX Send Master Control
This control adjusts the final level of the EFX mixing
bus (as taken from the EFX level controls on each
channel strip), the audio of which is sent to the AUX
Send 3 outputs, as well as the built-in digital effect
engine. The corresponding SOLO button allows you
to send the signal to the Control Room / Phones
mixing bus.
40. Control Room / Phones Controls
This control is used to adjust the audio level of the
Phones feed, as well as the signal sent to the Control
Room output, for use in monitoring and tracking of
audio.
Priority
Signal
Highest
From Solo
Medium
2T Return to Control Room
Lowest
Main L/R
41. Pre / Post Control
This button alternates the Control Room / Phones
source signals between those of post-fader and
pre-fader feeds.
34
35
36
37
38
40
41
39
