![background image](http://html1.mh-extra.com/html/phonic-ear/relation-2/relation-2_user-manual_1552977007.webp)
8
Getting started
Pack content
Please check if all following components are included:
• Telephone base unit
• Telephone handset
• Handset cord
• Telephone cable
• 7.5V plug-in PSU
• 4 pcs. Alkaline 1.5V AA
• User guide
If any parts are missing please immediately contact your dealer or the
manufacturer directly.
Telephone connection
1. Insert the handset cord (spiral-shaped cable) into the jack marked with a
receiver symbol on the left or right side of the base unit and into the
handset.
2. Insert the smaller plug for the telephone cable into the “LINE” jack (back of
the base unit). Insert the larger plug into the socket for your telephone line.
3. Insert the plug-in mains adapter cable into the “DC 7.5V” jack. Plug the
mains adapter into a 230 V mains socket.
Warning!
Don’t place the telephone close to televisions, fans, etc. so as to minimize the
risk of interference. Don’t place the telephone in direct sunlight or close to a
source of heat. Only use the original telephone cable or a comparable cable
with an international configuration.
Installing the batteries
1. Remove the battery compartment
cover by unscrewing the screw and
sliding the cover off.
2. Insert 4 fresh Alkaline 1.5V AA batteries
while observing the +/- polarity marks
in the battery compartment.
3. Replace the battery compartment cover
and secure it with the screw.
4. Connect the telephone cable to the wall
outlet for telephone.
Battery
compartment
cover
Batteries
Screw