PhoneMate PM5800 Installation And Operation Manual Download Page 24

 

 

- 24 - 

 

WARRANTY 

 

IMPORTANT! SALES SLIP OR EVIDENCE OF PURCHASE DATE REQUIRED. 

 

This limited warranty gives you specific legal rights: you may also have other rights, 
which vary from state to state. The limited warranty is extended only to the original 
consumer of a PhoneMate branded product by the Manufacturer and is valid only with 
respect to consumers within the United States of America and Canada. Should this 
product prove defective by reason of improper workmanship or material during the 
period of one (1) year from date of original purchase, the Manufacturer will repair or, at 
its option, replace the product without charge for parts or labor. If Manufacturer elects to 
replace the product, such replacement may be accomplished with a factory-reconditioned 
unit.  
This limited warranty does not apply: (a) to any product damaged by accident, misuse, 
improper line voltage, lightning, fire, water, or other acts of nature, (b) if the product is 
altered or repaired by anyone other than the Manufacturer or one of its authorized 
warranty stations or (c) if the FCC-approved connector plugs are removed. This limited 
warranty does not cover broken or marred cabinets. 
Except to the extent prohibited by law, all implied warranties made by the Manufacturer 
in connection with this product are limited in duration to a period of one (1) year from the 
date of original purchase, and no warranties, whether expressed or implied, shall apply to 
this product after said period. 
Should this product prove defective in workmanship or material, the consumer’s sole 
remedies shall be such repair or replacement as is herein above provided. Under no 
circumstances shall the Manufacturer or PhoneMate Corporation be liable for any loss or 
damage, direct, consequential, or incidental arising out of the use of or inability to use 
this product. 
Some states do not allow limitations on how long an implied warranty lasts or the 
exclusion or limitation of incidental or consequential damages, so the above limitations 
or exclusions may not apply to you. 
In order to obtain warranty service, you must provide evidence of purchase date. For your 
convenience, keep the dealer’s dated bill of sales or delivery ticket as evidence of the 
purchase date. 
 
PhoneMate and the PhoneMate Logo are registered trademarks of PhoneMate 
Corporation and are used under license from PhoneMate Corporation. 
 
 
  

Summary of Contents for PM5800

























Reviews: