- 19 -
OTHER FEATURES
Using the Handset Finder (PAGE)
1. Press
Page
on the base. If the handset is within range, a triple beep will sound for 50 seconds.
2. Place the handset back into the base or press the
CH
key on the handset, or press any other
handset key twice, to stop the page/find feature.
Security Code
The security code prevents your cordless telephone conversation from being accessed by a
phone on a different line. Once the handset battery is fully charged, the handset will automatically
select the code from a total of over 65,000 combinations. The code is changed every time the
handset is placed in the cradle (indicated by a beep).
If you experience difficulty with placing or receiving calls, a lost security code may be the cause of
the problem. When this occurs, the handset can no longer communicate with the base. Reset by
placing the handset on the base for 5-10 seconds. If that does not work, unplug the AC adapter
from the wall outlet. Disconnect the handset battery for 5-10 seconds and then reconnect. Place
the handset back on the base and then replug the AC adapter.
Channel Changing
If you are experiencing interference during a telephone call, press the
CH
key. The Unit will scan
up to 40 channels and select the clearest one to provide the best possible reception.
Out of Range Warning
If the handset is moving too far away from the base, the phone will sound a triple beep every two
seconds to warn you that it is out of range. Move closer to the base to end the beeping and
maintain the connection on your phone call. Otherwise, the call may be disconnected.