Phonak Roger Mylink, User Manual, Page: 26 / 41

25
The signal is interrupted during audio streaming
Roger MyLink is too far away
from the Roger microphone
Roger MyLink is shielded by an
obstacle (e.g. human body)
The sound of Roger MyLink is bad
Electromagnetic fields from
other equipment may create
an audible hum through the
T-Coil of your hearing aids
Roger microphone is not worn
correctly
The volume is too loud or too soft
Volume is not correctly set
Move closer to the Roger
microphone to move within
its operating range
Adjust the device orientation
and make sure you are in
line of sight to the Roger
microphone
Move away from electronic
equipment until the hum
stops
Make sure the Roger
microphone is worn as
indicated in its User Guide
Adjust the volume on Roger
MyLink until it suits your
preference
Most probable cause Solution