Phonak RemoteMic, User Manual, Page: 20 / 56

20
4. Daily use of the RemoteMic
Step 6.
Connecting the RemoteMic and ComPilot
Each time the devices are turned on, they will connect
to each other automatically.
1. Make sure the ComPilot and
RemoteMic are within 2 meters
(6 ft) range.
2. Turn the RemoteMic on.
3. The status light will turn green
first.
4. Wait until the status lights of
both devices turn solid blue. This
may take up to 30 seconds but
usually occurs within 5 seconds.
The ComPilot will confirm the connection by voice
messages (VoiceAlerts) or beeps, depending on the
ComPilot configuration.