8
9
B Boom
Microphone
A EarJack
TM
adapter
Fig 7
Fig 9
Fig 8
Fig 10
Fig 11
B1 To place the boom microphone
u
Adjust the boom microphone to sit within 1 cm of your mouth, close to your upper lip.
u
Ensure that the microphone sound inlet, marked with a white dot points towards your
mouth (Fig 9) to avoid any twisting of the boom microphone.
u
The boom microphone sound inlet has to be placed always parallel to the mouth (Fig 9).
u
The boom microphone can be placed on the left or on the right side (Fig 10).
B2 To use / mount / remove the windscreen
u
To keep the windscreen in position, the boom microphone is equipped with a Velcro
part (Fig 11).
u
To mount the windscreen to, or remove it from, the boom microphone, lift the windscreen
over the Velcro part and pull it on or remove it from the microphone (Fig 11).
Fig 6
A4 To attach windscreens to the earJacks
u
When using FreeCom 7100 outdoors, snap-on foam windscreens significantly reduce the
wind noise generated by turbulence around the microphones located on each earJack™
adapter (Fig 6).
u
When attaching these windscreens, ensure that the snappers are inserted precisely into both
slots on the adapter (Fig 6).
A5 To maintain the system
u
Remove the earJack™ adapter from the ear mold by pressing the snap lock springs together
(Fig 7) and withdrawing the adapter, starting at the top (Fig 8).
u
Clean and disinfect the ear molds with soap and water. Never use water or other liquids to
clean the earJack™. Let ear molds dry fully before use.
