Phoenix RPC12 Series, Cli Reference Manual

Page: 210 / 245

Chapter 3 Command Descriptions 211
show volumecopy-status
Description
Shows information about in-progress volume copy operations. While a volume copy
is in progress, the destination volume cannot be accessed.
Input
Output
Example
Show information about volume copies in progress for controller A.
show volumecopy-status [controller a|b]
Parameter Description
controller a|b
Optional. Shows volume copy operations for volumes owned
by controller A (upper) or controller B (lower) only. If this
parameter is omitted, all volume copy operations are shown.
Field Description
Name
Destination volume name
Serial#
Destination volume serial number
Vdisk
Destination virtual disk name
Source Volume
Source volume name
% Complete
Percent complete of the volume copy
#
show volumecopy-status controller a
Name Serial# Vdisk
Source Volume % Complete
---------------------------------------------------------------
Copy 00c0ffd2723600482ec8504501000000 VD1
MV1 35
----------------------------------------------------------------