![background image](http://html.mh-extra.com/html/phoenix/pwb-1530/pwb-1530_manual_1551165022.webp)
SEE PAGE 12 OF THIS MANUAL FOR A DIAGRAM
OF THE FOLLOWING PARAMETERS.
THE INPUT SHIFT KEY HAS A TWO WAY ARROW (
<->
).
A-1 PRESS
<->
KEY TO ACCESS THE A-1 SCREEN. USE THE PULL OUT RULER TO MEASURE THE
DISTANCE TO THE CENTER LINE OF THE INSIDE WEIGHT PLACEMENT.
MULTIPLY THE MEASUREMENT BY 10.
ENTER THIS MEASUREMENT INTO THE A-1 SCREEN.
A-E PRESS
<->
KEY TO PROCEED TO THE A-E SCREEN. USE THE PULL OUT RULER TO MEASURE
THE DISTANCE TO THE CENTER LINE OF THE OUTSIDE WEIGHT PLACEMENT, JUST BEHIND THE
RIM FACE.
MULTIPLY THE MEASUREMENT BY 10.
ENTER THIS MEASUREMENT INTO THE A-E SCREEN.
D-1 PRESS
<->
KEY TO PROCEED TO THE D-1 SCREEN.
IF YOU HAVE PRE MEASURED THE D-1 DIAMETER ENTER IT INTO THE D-1 SCREEN NOW. IF
YOU HAVE NOT PRE MEASURED, DO SO NOW AND ENTER THE MEASUREMENT INTO THE
SCREEN
D-E PRESS
<->
KEY TO PROCEED TO THE D-E SCREEN.
IF YOU HAVE PRE MEASURED THE D-E DIAMETER ENTER IT INTO THE D-E SCREEN NOW. IF
YOU HAVE NOT PRE MEASURED , DO SO NOW AND ENTER THE MEASUREMENT INTO THE D-E
SCREEN.
CLOSE THE HOOD TO SPIN THE TIRE.