![background image](http://html1.mh-extra.com/html/phoenix/props-kylo-v2/props-kylo-v2_assembly-instructions-manual_1551322001.webp)
Phoenix Props Kylo V2 assembly instructions
This is to help you put this saber together, give you an idea where all the screws go, how the parts
assemble and so on.
This is a example of the unpacked saber you will get.
In the box the top half and shroud are separate from the lower half of the hilt. Simply put them
together. The hole on the shroud below the cutout should line up with the hole on the main body.
These holes are where the cable holders fit.
Inside the box is also a small bog of parts (should be inside the hilt body and the display plaque.