The PV-5D.2-2U is a top-of-the-range automatic mixing amplifier with a transmission quality that far exceeds
the requirements of DIN 45500.
The automatic mixer amplifier is equipped with digital power amplifier (Class-D) and 200 watts of power (100 V).
All outputs are electronically balanced with equipotential bonding.
All microphone / line inputs 1 to 4 are equipped with separate treble and bass controls, switchable phantom
power, HPF filter and sensitivity control (GAIN) (on the back).
Automatic mixers of the POWERVOICE series are equipped with automatic NOISE GATE system for the micro-
phone inputs (1-4). The 21-band graphic EQ, together with the parametric EQ and Feedback-Limiter (shifter),
provides more accurate spatial equalization and excellent spatial acoustics. Furthermore, the automatic mixers
have an additional speaker line (100V output) with separate volume control and SOFT START for reducing the
noise and for better speaker protection.
POWERVOICE „D“ series now with digital power amp technology:
Phoenix Professional Audio‘s POWERVOICE automatic mixers have been redesigned and improved, especially
in their electronics: A new digital amplifier (Class-D) has been installed in the automatic mixers of the new „D“
series - the state of the art. The fans in all new amplifier models are temperature controlled and, in contrast to
the fans of the previous versions, are very quiet. The new „D“ series is also very energy efficient.
The devices are developed as table version. 19“ mounting (2U) available on request. Further details can be
found in the technical data.
For power boosting, power amplifiers of the series WM-200DT, WM-400DT and WM-600DT are available.
These devices comply with the Electromagnetic Compatibility Directive 89/336/EEC and the Low Voltage
Directive 73/23/EEC.
GENERAL INFORMATION
Instruction manual
- 2 -
PV-5D.2-2U
™
SAFETY INSTRUCTIONS
Before putting the automatic mixing amplifier PV-5D.2-2U into operation, we ask you to carefully read the
safety instructions.
We ask you to perform the installation according to the following guidelines:
1 - Always place the amplifier on a flat and stable surface.
2 - Choose a dry environment and do not put liquids on the amplifier.
3 - Avoid the proximity of heat sources.
4 - Never open the case of the amplifier without disconnecting the power plug from the socket.
5 - Only connect the device to 230 VAC mains voltage.
© Copyright 2019, Phoenix Professional Audio GmbH, www.phoenix-pa.com
Phoenix logo is registered with the DE Patent and Trademark Office (TM)
All trademarks are the property of their respective owners
