background image

The exclamation mark in a triangle is intended to alert the user to the presence of 
important operating and maintenance instructions in this manual. 

The symbol consisting of a lightning bolt with an arrowhead in a triangle is intended to 
alert the user to the presence of non-isolated, dangerous voltages within the housing 
that may be strong enough to give off an electric shock. 

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE 
COVER. USE QUALIFIED PERSONNEL FOR ALL MAINTENANCE WORK.

EXPLANATION OF GRAPHIC SYMBOLS

1. Read this manual carefully. 
2. Keep this manual in a safe place. 
3. Observe all warnings. 
4. Follow all instructions. 
5. WARNING: To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture. 
     Do not use this device near water. 
6. Clean only with a dry cloth. 
7. Do not cover any ventilation openings. 
8. Do not install near heat sources such as radiators, air vents, stoves or other equipment (including amplifiers) that 
     radiate heat. 
9. Do not override the safety function of the polarity reversal protection or earthing contact plug. A connector with polarity 
     reversal protection has two pins, one wider than the other (USA / Canada only). A safety plug has two pins and a ground 
    terminal. If the supplied plug does not fit into your outlet, it will be outdated and must be replaced by an electrician. 
10. Route the power cord so that nobody can step on it or get caught. This particularly applies to plugs, sockets and the 
    point where the cable exits the device. 
11. Use only Phoenix Professional Audio GmbH products and specified accessories. 
12. Have maintenance performed by qualified service personnel only. The device must always be serviced if it has been 
   damaged in any way, for example, if the power cord or plug is damaged, liquids have been spilled on the product, or objects 
   have fallen into the product, the product has been exposed to rain or moisture, is not working normally, or has been dropped.

© Copyright 2019, Phoenix Professional Audio GmbH, www.phoenix-pa.com 
Phoenix logo is registered with  the DE Patent and Trademark Office (TM) 
All trademarks are the property of their respective owners

IMPORTANT SAFETY INSTRUCTIONS & SYMBOL DECLARATION

- 1 -

Instruction manual

PV-5D.2-2U

Summary of Contents for POWERVOICE PV-5D.2-2U

















Reviews: