![background image](http://html.mh-extra.com/html/phoenix/melange/melange_operating-and-service-manual_1551258017.webp)
Ver. Phoenix 1.0 _ 01-09-2019
- 17 -
Phoenix Mixer India Pvt. Ltd.
Note:
Always remove the can from the mixer after the mix cycle has been completed. Follow
the UNLOADING instructions. Below.
UNLOADING THE CAN:
1.
Open the MELANGE Mixer door to its fully open position.
2.
Using the two handles on the front of the Can Holder Assembly, slowly rotate the
Assembly to the vertical, top dead center (TDC) position, with the Clamp Mechanical
Mechanism at the top. When it reaches this position the Clamp Assembly Lock will
engage, locking it in place.
Note:
If, for some reason, it is necessary to rotate the Can Holder Assembly after the lock has
engaged, Pull Shutter and Rotate the assembly off the TDC position. The lock will remain in the
disengaged position until the assembly is returned to the TDC position.
Summary of Contents for MELANGE
Page 14: ...Ver Phoenix 1 0 _ 01 09 2019 14 Phoenix Mixer India Pvt Ltd LOGIC CARD AS670 101 ME ...
Page 20: ...Ver Phoenix 1 0 _ 01 09 2019 20 Phoenix Mixer India Pvt Ltd 10 SCHEMATIC DIAGRAM ...
Page 21: ...Ver Phoenix 1 0 _ 01 09 2019 21 Phoenix Mixer India Pvt Ltd 11 SPARE PART LIST ...
Page 22: ...Ver Phoenix 1 0 _ 01 09 2019 22 Phoenix Mixer India Pvt Ltd ...