Operation Instructions:
1. Inserting Batteries
Insert 4 AAA-size batteries into the battery compartment.
2. Personal Data Editing
In order to increase the accuracy of body fat percentage measurement,
personal data has to be set. Personal data including gender, height and
age can be stored in memory for up to 10 persons.
Stored data will remain in memory until being edited again.
a. Press the [POWER] key to turn on the unit. It will say "Hello". It will
say "I'm ready" when the display shows "0.0 lb"
b. Press SET key. Memory number "01" will appear in the display. Use
the [>] (ascending order) or [<] (descending order) key to select Memory
number. Press the SET key.
Use the [>] key to specify gender. Icon of selected gender will appear on
the left side of the display. Press the SET key.
c. When height value is displayed, use the [>] (ascending order) or [<]
(descending order) key to specify height. Height range: 3'3" to 7'3", with
increment of 1 inch. Press the SET key.
d. When age value (30) is displayed, use the [>] (ascending order) or [<]
(descending order) key to specify age. Age range: 10 – 100, with
increment of 1. Press the SET key.
e. The selected Memory number will appear in display again, indicating
that data input is complete.
To proceed to set personal data for other Memory numbers, press the [>]
or [<] key to select the next Memory number and repeat the above steps.
To start measurement using the selected Memory, press the SET key and
follow steps 'b' to 'd' in the following section.
To turn off the scale, simply press the [POWER] key.
