**CAUTION**
All wiring should be done by licensed electricians in accordance with local codes. Improper installation or use may
result in serious injury. Always remove oven from power source before troubleshooting or repairing.
III.
TROUBLESHOOTING - TYPE 50 OVENS
OVEN FAILS TO OPERATE - NO HEAT
1. If oven will not heat, check power supply.
2. Check plug at outer end of power cord. Check complete
power cord for continuity. If defective, replace cord assem-
bly.
3. Disconnect wires from heating elements and check heat-
ing element for continuity (access through top of oven). If
defective, replace elements.
4. On type 50B ovens check thermostat for continuity at
ambient temperature (access through top of oven). If defec-
tive, replace thermostat.
OVEN OPERATES - OVERHEATS
1. Check thermostat operation as in number 5 (Oven Fails
To Operate - No Heat).
Thermostat
Thermostat
Heating
Elements
White
Power
Lead
Black
Power
Lead
Green
Ground
Lead
Heating
Elements
White
Power
Lead
Black
Power
Lead
Green
Ground
Lead
Heating
Elements
White
Power
Lead
Black
Power
Lead
Green
Ground
Lead
50B WIRING DIAGRAM
50B 240V WIRING DIAGRAM
50C 120V WIRING DIAGRAM
N5610244D-5
