![background image](http://html1.mh-extra.com/html/phoenix/acrylicarrier-small/acrylicarrier-small_assembly-instructions_1551271003.webp)
Step 1
To assemble the back piece:
Lay the back of the carrier flat on a hard surface. Position the back piece so the
bottom is closest to you. Remove the screws from three 10” perches and mount
the three perches to the back piece. Tighten the screws.
Step 2
To assembly the top, bottom, and side pieces:
Attach the top and bottom pieces by gently pressing the pegs into the plugs on
the back piece.
Attach the right piece onto the back by gently pressing the pegs into the plugs
(please note the orientation of the logo). Remove the screws from the last 10”
perch and mount the perch onto the right-side piece. Attach the left-side piece
and screw the perch into the left-side piece. Make sure that all the pegs are
secured into their plugs.