![background image](http://html1.mh-extra.com/html/phoenix/103465349/103465349_instruction-manual_1551149008.webp)
ZP-43 SLIM/2 X
Instruction manual
™
- 7 -
© Copyright 2022 Phoenix Professional Audio GmbH, www.phoenix-pa.com
Phoenix logo is registered with the DE Patent and Trademark Office (TM)
All trademarks are the property of their respective owners
- 7 -
21./22.- WIRELESS MIC. OUTPUT TX1/TX2 and OUT LEVEL
Balanced output of the two radio audio signals TX1+TX2 with separate „OUT LEVEL“ output signal strength
control on XLR socket.
Useful information
The output can be used as an audio connection to an already existing sound system, i.e. the wireless microphones
can be connected to your church loudspeaker system using the ZP-43 SLIM/2 X (output no. 21).
IMPORTANT: Please set the volume control no. 12 to „0“ so that the internal speakers are switched off. The
volume adjustment or signal strength of the output is carried out with controller no. 22.
23.- SERVICE ENTRANCE
Not assigned.
24.- 24VDC INPUT (mains operation and charging input)
The built-in 24VDC socket serves as a 24VDC power supply for so-called mains operation with battery
monitoring and at the same time as an input for the charging process.
Please note Chapter 20 „20.- LOAD OPERATION DISPLAY“.
25.-STAND FLANGE/SHOULDER STRAP MOUNT
On the lower part of the procession system there is a flange with a diameter of 35 mm for the tripod / stand
mount. Thus, the ZP-43 SLIM/2 X procession system can also be used as a stationary system in your church
or outside for open air church services.
IMPORTANT:
The lower flange also serves as a mount for the supplied shoulder strap or the optional cross strap.
FRONT PANEL CONTROLS