5
Cover wing joint with self adhesive trim strip.
16
Tape
Instruction Manual
Trainer 60
17
18
19
Remove the covering
20
Center the wing. Cut the covering from the slots in
the fuselage for the Horizontal Stab and Vertical
Fin. Put horizontal stab on fuselage and center
like the wing, also level the stab to match up with
the wing. Mark the horizontal stab where it will
glue to the fuselage.
Secure the wing to the fuselage using the plastic
screws
Trim the covering from the stab where it will glue
onto the fuselage. Cut only through the covering,
do not cut into the balsa.
Glue stab on with 30 minute epoxy and recheck
alignment.
Screw
A
A
HORIZONTAL-VERTICAL INSTALLATION
B
B
A
A
B
B
Put vertical fin in fuselage slot, mark where
covering needs to be trimmed. Carefully trim
covering. Line up vertical fin and epoxy in place
keeping the vertical fin perpendicular to the stab.
Remove
the covering
