Bestell-Nr. 99425 Ausgabe 11.2014 Version 1-0
5.
Error indication with Click codes
When the control unit is switched on the user gets an acoustic signal (click) sent by the control unit which gives a
state-information about the system.
The table below shows which number of clicks corresponds to certain information.
Number of
clicks
State information
2x
Normal operation
No problems detected
1x
Emergency operation
The system is in Safe-State, movement is not possible.
Check LED indication and/or error codes on the display of
the handswitch.
3x – 6x
Last shutdown incomplete/
forced reset
Check LED indication and/or error codes on the display of
the handswitch.
6.
Error indication with LEDs
Depending on the version, the COMPACT-e-EU is equipped with LEDs to indicate errors even if a handswitch
without display is used. These LEDs are placed on the housing top over the handswitch socket and each motor
socket.
Error code
Description
Remedy
A Motor channel LED is
blinking
Internal Error
•
Unplug power cord and plug it in again after a few
seconds. Make a manual reset.
•
If the error is still indicated unplug power cord and
contact the customer service.
Control box LED is on
Reset necessary
•
Make a manual reset
Note:
The LED is still on while the reset movement or if
reset is not completed. It is deactivated when the reset
is finished.
A Motor channel LED is
blinking
Kurzschluss im
Motorkanal
(die LED über dem
betroffenen Kanal blinkt)
•
Unplug the control unit
•
Fix the external short circuit
•
Start the control unit again
A Motor channel LED is
on
Motor is missing
(the LED over the
affected channel is on)
•
Plug in the correct motor to the motor socket that
shows the error
•
Reset all motors
Control box LED
Motor channel LEDs
