Issue Department
：
Bedding Division
Date
：
2017-8-15
System Instruction
Author
：
Instruction of RF54
Edition
：
1.1
Page 2 of 5
2
/
5
then the tilt and lumbar actuators move;
1.2
M1 button
（
button 4 in figure 1
）
Click the M1 button, the actuator moves to M1 position, stop when click any button during
the movement;
1.3
M2 button
（
button 6 in figure 1
）
Click the M2 button, the actuator moves to M2 position, stop when click any button during
the movement;
1.4
Head up
（
button 7 in figure 1
）
Press and hold
HEAD UP button of remote, head actuator moves out, stop when
released
；
1.5
Head down
（
button 8 in figure 1
）
Press and hold HEAD DOWN button of remote, head actuator moves in, stop when released
；
1.6
Foot up
（
button 11 in figure 1
）
Pressa and hold FOOT UP button of remote, foot actuator moves out, stop when released;
1.7
foot down
（
button 12 in figure 1
）
Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released
；
When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head and
foot actuators start moving;
1.8
Flat
（
button 9 in figure 1
）
Click FLAT button, the bed goes flat, stop when click any button during the process of going
