Operating notes
MEGAMAT XS
22
73115 4.0
7. Operating notes
The factual information contained within may be used when you are creating the end-product man-
ual. The installation instructions do not contain all information required for the safe operation of the
end product. They only describe the installation and operation of the drive as a partially assembled
piece of machinery.
CAUTION
When creating the operating instructions, remember that the installation instructions
are intended for qualified specialists and are not for typical users of the end product.
7.1
General information
Only a DewertOkin device should be used to control the drive since they have already been
verified to work together.
Power-on time / intermittent operations
The MEGAMAT XS drive has been designed for intermittent operations. Intermittent operation is an
operational mode where the drive must pause after a specified maximum period of operation (power-
on time). This protects the drive from overheating. Extreme overheating can cause a malfunction.
The ratings plate specifies the maximum power-on time and the required pause intervals.
Avoiding electrical risks
WARNING
Make sure that all live (current-carrying) parts of the drive system and power supply
cannot be touched. In particular, be sure that unused power and control unit connec-
tions are covered adequately.
Shutting off the drive
CAUTION
In order to shut off the drive, unplug the mains power plug and the battery plug (when
present)! The power plug must always be accessible during operations so that emer-
gency shut-off is possible.
Avoiding cable damage
Be sure that your operating instructions inform the user about the possible cable risks.
CAUTION
The cables (particularly the mains cable) should not be run over. In order to prevent
injuries or drive damage, no mechanical strain should be placed on the cables.
