Phoenix Mecano DewertOkin IPROXX SE, System Instructions

Page: 7 / 12

04/2020
ID 44411 3.0
04/2020
ID 44411 3.0
®
IPROXX SE/SE+
6
Ÿ By passing the magnetic side of the magnetic key over the lock symbol once
again, additional functions on the handset (e.g. Trendelenburg, seated position) can
be released. They vary depending on the version or the customer`s requirement
(mode 3).
The mode LED next to the lock glows orange.
If no key is pressed after approx. 30-45 seconds of the handset having last been
actuated, mode 1 is reset.
Putting into operation
Connect the handset to the DewertOkin system. The
handset automatically switches to
mode 1 (basic state).
Mode 1
Handset is completely blocked.
Mode LED doesn’t glow .
Mode 2
Customer-specific handset adjustment functions are
released.
Mode LED
glows green
Mode 3
Customer-specific handset additional functions are released.
Mode LED
glows orange
Passing the magnetic side of the magnetic
key over the lock symbol once.
Passing the magnetic side of the magnetic
key over the lock symbol once.
Passing the magnetic side of the magnetic
key over the lock symbol once or using a
time switch approx. 30-45 sec.
Power On
out
Power On
orange
Power On
green
®
Funktionsdiagramm IPROXX SE+
7
Functions of the display
Function LED LED glows green when a key is pressed,
visual display of first-error security.
Power on LED with battery charging circuit
LED flashes yellow when battery is charging.
LED glows permanently when battery is fully charged or not
connected.
without battery charging circuit
LED glows permanently when connected to the mains.
Maintenance and Repairs
At regular intervals carry out the inspections. The recommended inspection period is: 6
months
In addition to the above, the following checks should be carried out at shorter intervals:
Ÿ
Regular visual checks for damage of all kinds
Check the housing for cracks and fractures and the connection lead for signs of
pinching and shearing-off. Also check the strain relief with kink protection, in
particular after each case of mechanical loading.
Ÿ
Regular checks of the leakage currents (by a specialist).
Ÿ
Regular functional checks of the Handset.