background image

14

IPROXX SM/SM+/SMP

®

Cleaning

handset

The

was designed so that it would be easy to clean. Its smooth surfaces

simplify the cleaning process.

1 Be sure to disconnect the handset cable from the drive or control unit before you start

cleaning.

2 Clean the

handset using a moist cloth.

3 Be sure that you do not damage the connecting cables during the cleaning.

Never clean the handset in an automated washing system or with a high-pressure cleaner.
Do not allow fluids to penetrate the handset. Damage to the handset could result.

Do not use a cleanser that contains benzene, alcohol or similar solvents.

The

handset consists of electronic components, cables and metal and plastic

parts. You should observe all corresponding national and regional environmental regulations
when disposing of the

handset.

The disposal of the end product is regulated in Germany by Elektro-G, internationally by the
EU Directive 2002/95/EC (RoHS, from 1 Jul. 2006), Directive 2011/65/EU (RoHS,
from 3 Jan. 2013) or by any applicable national laws and regulations. (The end product is
not regulated by the EU Directive 2002/96/EC (WEEE) and its amendment EU Directive
2003/108/EC.)

IPROXX

®

IPROXX

IPROXX

IPROXX

®

®

®

®

Disposal

The IPROXX handset should not be disposed of with normal household waste!

02/2013

ID No. 56171

02/2013

ID No. 56170

Summary of Contents for DEWERT OKIN IPROXX SM

















Reviews: