Installation
CU165
16
92290 1.0
CAUTION
You should only connect and disconnect the cables when they are completely disconnected from
any live current!
Pull out the power supply plug from the plug socket.
Screw the control unit onto the end product (as shown in Figure 8 ). Use the mounting holes shown
in Figure 7 located on the control unit. Use screws meeting the requirements of DIN EN ISO 7049
with max. 2.9 mm diameter and of suitable length (5 mm plus the screw-in depth into the end prod-
uct, screw head: 5.6 mm diameter).
