Phoenix International VF2-350-SCW-RHD, Technical Information

Page: 7 / 22

Scope
This chapter describes the organization of this manual and gives an overview of the VF2-350-SCW-RHD module.
Manual Organization
This manual is organized as follows:
Chapter 1 MANUAL ORGANIZATION AND INTRODUCTION
Contains an overview of the manual organization and provides a brief product description.
Chapter 2 FEATURES AND SPECIFICATIONS
Describes the product features, compatibility, and electrical specifications.
Chapter 3 CONFIGURATION, INSTALLATION AND OPERATION
Provides information on how to configure and install the VF2-350-SCW-RHD.
Chapter 4 SCSI HARD DISK DETAILS
Contains specific details about the hard disk drive used on the VF2-350-SCW-D.
Chapter 5 PRODUCT SUPPORT, SERVICE AND WARRANTY
Describes what to do if you have trouble and how we will support you.
VF2-350-SCW-RHD Introduction
The VF2-350-SCW-RHD has been designed to provide a complete disk drive subsystem which is mechanically compati-
ble with the VMEbus. It has been designed specifically to interface with VMEbus processors with an embedded
Fast/Wide SCSI Host Adapter. Together with the processor, a complete system can be installed in only three standard
VMEbus system slots. The VF2-350-SCW-RHD provides a removable 3.5 inch low profile disk in a 2 slot 6U VME mod-
ule making it very convenient to have removable data storage. The drive used in the VF2-350-SCW-RHD was chosen for
compatibility, ruggedness and reliability. The Fast Wide SCSI-2 bus can be connected to the module via the front panel
68 pin Wide SCSI connector or via the P2 connector, with pins used in the A and C rows of P2 for the SCSI data, control
and parity signals.
Manual Organization and Introduction 1-3