Phalanx II NAS
User Manual
Phalanx II User Manual 11 Rev. B May 2019
PERIODIC MAINTENANCE
It is recommended to replace the clock battery in the Phalanx II every two years to
ensure the date and time of the system are always accurate. To replace the battery
(CR1225, Li-Ion) follow these steps:
-
Remove four (4) M2.5x6 Socket cap screws, using an Allen wrench, from the
battery cover.
-
Using tweezers, carefully remove the battery cover and battery from the chassis.
-
Install the new battery (CR1225) into the battery slot in the same orientation as
the battery that was just removed.
-
Re-install the battery cover and secure with hardware previously removed. Use
Service removable thread locking compound (Loctite 222 or equivalent). Do not
overtighten.
