Phoenix Contact AXC F 1050 User Manual Download Page 54

Page: 54 / 140

AXC F 1050

54 / 140

PHOENIX CONTACT

107709_en_00

6.6

Using the simulation function

You can simulate a project if you do not want it to be transferred to a controller. To use the

simulation function, proceed as follows:

•

Double-click on the controller node in the “PLANT” area.

The “axcf1050-1” editor group opens.

•

Select the “Cockpit” editor.

Select “Simulation” from the drop-down list (see Figure 6-5).

Figure 6-5

Setting up a simulation

•

Click on the

button (“Write project to controller and start execution. (F5)”).

The project is compiled, sent to the simulation and started.

The simulation includes a web server. If the project includes a PC Worx Engineer HMI ap-

plication (see Section 6.14), the web server provides the PC Worx Engineer HMI applica-

tion and processes the generated HMI pages.

Summary of Contents for AXC F 1050













































































































































Search results

Summary of Contents for AXC F 1050

Reviews:

Related manuals for AXC F 1050

Brands by name

Popular brands

Phoenix Contact AXC F 1050, User Manual

Search results

Summary of Contents for AXC F 1050

Reviews:

Related manuals for AXC F 1050

Brands by name

Popular brands