Phoenix Contact AXC F 1050 User Manual Download Page 77

Page: 77 / 140

Starting up with PC Worx Engineer

107709_en_00

PHOENIX CONTACT

77 / 140

6.13

Transfer the project to the controller

To transfer a project to the controller, proceed as follows:

•

Double-click on the controller node in the “PLANT” area.

The “axcf1050-1” editor group opens.

•

Select the “Cockpit” editor.

•

Click on the

button (“Write project to Controller and start execution. (F5)”).

The project is compiled, transferred to the controller and executed.

6.14

Creating an HMI application

In PC Worx Engineer, you can create an HMI application with which you can visualize, mon-

itor and control your application program on your controller.

Please note:

The project will only be transferred to the controller if you have selected “Cockpit”

“TCP/IP” in the editor; see Section “Connecting to the controller” on page 55 for more in-

formation.

If you selected “Simulation”, the simulation starts.

For more information on creating an HMI application, see “Installing and operating the

PC Worx Engineer software” in the quick start guide and in the PC Worx Engineer online

help.

Summary of Contents for AXC F 1050













































































































































Search results

Summary of Contents for AXC F 1050

Reviews:

Related manuals for AXC F 1050

Brands by name

Popular brands

Phoenix Contact AXC F 1050, User Manual

Search results

Summary of Contents for AXC F 1050

Reviews:

Related manuals for AXC F 1050

Brands by name

Popular brands