Phoenix Contact 1708 M12 POE, User Manual, Page: 7 / 34

Factoryline FL SWITCH 1708 M12 POE
105648_en_01 PHOENIX CONTACT
7
1 Factoryline FL SWITCH 1708 M12 POE
1.1 Properties
The Gigabit Power over Ethernet switch, which is suitable for industrial applications, en-
ables the common transmission of power and data according to IEEE 802.3at/802.3af via
an Ethernet cable. Up to 30 W supply power per port is possible.
This means that termination devices such as WLAN or Bluetooth access points, IP phones
or IP cameras can be connected quickly and inexpensively to the network, since the switch
handles the power supply of the connected devices.
The device is a compact switch in a robust IP67 metal housing. It has eight 8-pos. M12
Ethernet connectors, which enable the supply of PoE/PoE+ devices and operation with
speeds of 10/100/1000 Mbps. As it supports jumbo frames up to 9720 bytes, the switch is
ideal for networking cameras.
A total power of 200 W is available for supplying up to eight PoE/PoE+ devices. The switch
generates the 54 V DC required for Power over Ethernet according to IEEE 802.3at/802.3af
from the 24 V module supply for the connected termination devices.
Features
– Eight PoE/PoE+ supply ports
– No configuration required
– Automatic detection of connected devices
– Operation in networks with 10, 100, and 1000 Mbps supported
– Convenient status and diagnostic indicators
– Redundant 24 V supply possible
– Quality of Service with up to six internal priority queues supported
– MAC address table with up to 4000 MAC addresses
– Jumbo frames with up to 9720 bytes supported
1.1.1 Dimensions of the FL SWITCH 1708 M12 POE
Figure 1-1 Dimensions of the device