Phoenix Contact 1708 M12 POE, User Manual, Page: 11 / 34

Mounting and installation
105648_en_01 PHOENIX CONTACT
11
2 Mounting and installation
2.1 Mounting and removing the IP67 switch
The device should be mounted on a flat, perpendicular mounting surface. The connec-
tors/cables must be inserted from below. Secure the device using four screws, e.g., slotted
cylinder head screws according to DIN EN ISO 1207-M6 x 16-8.8. For the drill hole spacing
in mm, please refer to the drawing.
Figure 2-1 Spacing of the fixing holes
2.2 Connections on the device
Figure 2-2 Connections on the device
155
60
FL SWITCH IRT IP TX/3POF
Ord. No. 27 00 697
MAC - Address
X1 X2 X3 X4
US1
US2
FAIL
BF
FO
LNK
ACT
X5
US1 GND US2 GND PE
X6
US1 GND US2 GND PE
X7
R1 R2
X8
MEM
00.A0.45.1B.D2.1D
Sno.: 200221439
s ig n ali n g c on tact
p o w er s upply
8 gigabit p or t s