Removing the hardware
107068_en_06
PHOENIX CONTACT
57 / 74
7 Removing the hardware
7.1
Safety notes
7.2
Removing the conductors
•
Disconnect the charging station and the controller from the power supply.
•
Open the spring by pressing on the spring lever (A) using a screwdriver.
•
Remove the conductor (B).
Figure 7
-
1
Removing the conductor
NOTE: Electrostatic discharge
The device contains components that may be damaged or destroyed by electrostatic dis
-
charge. When handling the device, observe the necessary safety precautions against
electrostatic discharge (ESD) in accordance with EN 61340-5-1 and IEC 61340-5-1.
NOTE:
•
Before any work on the device, always switch off the supply voltage and ensure it
cannot be switched on again!
B
A
