onlinecomponents.com
24
PHOENIX CONTACT
102553_00_ia
B
Clutch Handle (Clutch Torque Setting)
Adjust the torque to one of the 21 possible settings to the job.
There is an interval of about 0.13 Nm (1.3 kg-cm or 1.1 in-lbs)
between steps.
Figure 2
Clutch torque setting
•
When use at high speeds, set the scale at 10 or below.
(Operation stops at the maximum torque 1.5Nm (15kgf-
cm), when the scale is higher.)
•
The auto shut off function may become inoperable at use
at higher scales when battery power drops. Recharge the
battery in that case.
CAUTION! Test the setting before actual operation.
Scale
Torque
Use
1
Approx. 0.29 Nm
(3.0 kgf-cm or 2.6 in-lbs)
For driving screws
5
Approx. 0.82 Nm
(8.4kgf-cm or 7.3 in-lbs)
9
Approx. 1.35 Nm
(13.8 kgf-cm or 12.0 in-lbs)
13
Approx. 1.88 Nm
(19.2 kgf-cm or 16.6 in-lbs)
17
Approx. 2.41Nm
(24.6 kgf-cm or 21.3 in-lbs)
21
Approx. 2.94Nm
(30.0 kgf-cm or 26.0 in-lbs)
Approx. 4.4Nm
(45.0 kgf-cm or 39.0 in-lbs)
For powerful driving
screws and drilling
Set the scale at this line.
