onlinecomponents.com
102553_00_ia
PHOENIX CONTACT
23
E
ngl
is
h
Parts Identification
A
Hexagonal Bit Holder (Attaching the bits)
Figure 1
Attaching the bits
•
Hold the bit holder and pull it against the driver.
•
Insert the bit into the hole of the drive shaft.
•
The bit holder will return to its original position when re-
leased.
•
Pull the bit to make sure it does not come out.
•
To remove the bit, pull back on the bit holder in the same
way.
NOTE: When attaching or removing bit, be sure to
set the main switch lock at the lock position.
Bit
Hexagonal bit holder
9.5 mm – 11.5 mm
(3/8" – 7/16")
6,35 mm
(1/4")
