Phoenix Audio Technologies | 16 Goodyear #120, Irvine, CA 92618 | 818-937-4774
3.
We must also provide power to the Condor. The two available options are as follows.
•
Option 1: Connect via the included USB power supply
•
Option 2: Provide PoE - no data is required and you may also use a PoE injector.
4.
We are now ready to link the Local Audio Extender and the Stingray MT700.
There are two connections needed between the Local Audio Extender and the Stingray. For this
setup, we will be using the Stingray’s
“LINE INPUT”
connection port
as well as the “SPKR OUT”
port.
1. Using the
included 6” Phoenix to 3.5mm cable
, connect the following:
•
“
Mic Out
” (
pink) port on
the Local Audio Extender to the first “LINE INPUT” port on the
Stingray.
2. Using
the included 6” Phoenix to Dual 3.5mm cable
, connect the following:
•
“Audio In” (green) port on the Local Audio Extender to the “SPKR OUT” port on the Stingray
.
•
IMPORTANT:
The additional connector on this cable will be used for the second Condor.
For these two connections, take care to ensure that the correct cables are inserted properly. Insert
the red cable into the positive (+) port, the white cable into the negative (-) port, and the black
cable into the ground (GND) port. Make sure to push the ends of the cables, ferrules, securely into
the Stingray unit, with no part of the ferrule tip exposed.
