Phocos CXNup 2B, User Manual

Page: 26 / 92

The CXNup 2B controller has a 2 year data logger. Push "ESC" (X) button when the LCD is
scrolling the current values and the controller will enter the menu. Select "LOG" with the arrow
keys and press "SET" ( ) to enter the data logger menu. You can get the charge Ah for battery
✔
1/2 and SOC in the morning for battery 1, as daily data for a month, monthly data for two years
and total data.
Settings
The CXNup 2B has four buttons (ESC = X, DOWN, UP, = SET) to navigate through the menu
✔
and adjust the settings. To enter the menu, push the ESC (X) button and navigate between the
'LOG' and the 'Set' menu with the arrow buttons (UP and DOWN). To modify settings, enter the
menu ‘Set’ by pressing the SET ( )
✔
button. Navigate to the desired value with the arrow buttons
(UP and DOWN). Press the SET ( )
✔
button to modify the value (the selected value flashes).
Modify the value with the arrow buttons (UP and DOWN) and save the changes by pressing the
SET ( )
✔
button again (The value flashes fast for a second to acknoledge the change) or return to
the ‘Set’ menu without saving the modified value by pressing the ESC (X) button. The following
menu settings are presented by the LC display of the controller. Voltage values for 12 V systems.
For 24 V systems double voltage values.
1. Battery 1 'Pri' menu: Set the ratio of priority. 100% means battery 1 is charged
with full panel current. Battery 2 is only charged with excess energy.
2. Battery 1 Type 'typ' menu: set battery type 'GEL' , 'LIQ' and 'LFP' as Gel, Liquid,
LiFePO4 battery
3. Battery 2 Type 'typ' menu: set battery type 'GEL' , 'LIQ' and 'LFP' as Gel, Liquid,
LiFePO4 battery
4. 'rSt' menu: Reset settings to factory default: YES, NO
5. 'buz' menu : Buzzer ON, OFF
6. 'Loc' menu: Lock settings YES, NO
24