Phocos CX10, User Manual

Page: 28 / 139

Open the terminal lid.
25
Mounting and Connecting the Charge Controller
REMARK: Connect the controller by following the steps described
below to avoid installation faults.
Additionally, it has a serial interface which can be used with an optional
interface adapter (CX-I) for functions of datalogger.
The charge controller has a number of safety and display functions.
The regulator is intended for indoor use only. Protect it from direct sunlight
and place it in a dry environment. Never install it in humid rooms (like
bathrooms).
The regulator measures the ambient temperature to adopt the charging
voltages, therefore it must be installed in the same room as the battery.
The regulator warms up during operation. It shall be installed on a non
flammable surface only.