Phocos CIS-MPPT 85/20, User Manual

Page: 26 / 86

Voltage controlled (LVD): Disconnects at a fixed voltage between 11.0/22.0 V and 11.9/23.8 V (Voltage steps
0.1/0.2 V).
Note: Battery voltage must be below adjusted setting for longer than 2 minutes for LVD to take effect.
Note: Voltage levels before/after the slash are valid for 12 V and 24 V systems respectively (valid for the
charge controllers presented in this manual).
Factory Settings
You can configure CIS-MPPT 85/20 charge controllers via the Remote Control Unit (CIS-CU). See CIS-CU
manual for details.
Factory setting
Load mode Standard controller (night light off)
Low voltage disconnect SOC4
Battery type Gel
Night light level 8.0/16.0 V (1)
Load 1 evening hours 0 h
Load 1 morning hours 0 h
Dimming evening hours 0 h
Dimming morning hours 0 h
Dimming value 50 %
(1) PV panel open circuit voltage: Day level = Night level + 1.5/3.0 V
24
EN