www.phocos.com
29 |
P a g e
Figure 27:
Control interface
Inverter control:
Setting Item
LCD Screen View
Instructions
On / Off
control
Control the “On/Off” through the panel.
Press “UP” and “DOWN” in the control
interface to select the operation. Press
“ENTER” to ensure the operation and press
“ESC” to return.
Restart
Restart the inverter through the panel and
save the all settings and operation record.
Press “ENTER” to begin restarting and the
inverter will begin to self-inspect or press
“ESC” to return.
Clear Record
Press “ENTER” to clear all records or press
“ESC” to return.
“Record clear” is to clear all setting
parameters through the panel, restore to
the factory setting and save all history
operation records.
Restore to
factory
“Restore to factory” to clear all setting
parameters and history operation records
through the panel and restore to the
factory settings. Press “ENTER” to begin the
procedure or press “ESC” to return.
Grid Certification Selection
When powering on the inverter by DC input for the first time or after restoring factory settings, the LCD screen will
show a list of countries, requiring the user to choose what country of use as shown below:
Figure 28:
Control interface
Press the “UP” or “DOWN” button to select the country (refer to the table below), then press the “ENTER” button to
complete the setting. After finishing the country setting, please follow the user manual required with the proper use
of inverter.
Available countries and their grid certification: