53
EN
EN
EN
EN
4
SYSTEM INPUTS AND OUTPUTS
4.1
Shock sensor input
Power supply for shock sensor is permanent.
4.2
Additional sensor input
Power supply for additional sensor is present only when system is armed. Sensor like tilt, ultrasonic or
microwave can be connected.
4.3
Door and Hood input
System is triggered when door input is connected to ground or +12V. System is triggered when hood
input is connected to ground.
4.4
Ignition input
Input from ignition wire.
4.5
Start Killer output
Wire is grounded when system is armed. Max. current capacity -250 mA.
4.6
Output to the PAGER
When alarm is triggered, PAGER output is switched to ground. Max. current capacity -1A.
4.7
Output to the TRUNK
When output is activated, +12V will appear on wire. Impulse length can be 0,5s, 4s, 40s or latch
(option 9).
4.8
Output to the AUX
When output is activated, ground will appear on wire. Impulse length can be 0,5s, 4s, 40s or latch
(option 10). Max. current capacity -1A.
4.9
Output to the SIREN
Positive output (+12V) to the siren.
4.10
Output to Signal Lights
This output is relay type, so it can be used as negative as well as positive.
4.11
Door LOCK, UNLOCK outputs
Universal six relay output is possible to use for variable connection directly to actuators or to CDL’s
control units. Length of lock / unlock impulses can be set (options 1 and 2).
Example of wiring diagram for door locking system:
input
+12V
GND
Connection of additional sensor – front view.
