Philips XZ5810, Manual

Page: 24 / 84

6 While holding the SmartClean system with one
hand, gently push the top part of the
SmartClean system back down (‘click’).
Using SmartClean
Note: If you use the shaver with shaving foam,
shaving gel or pre-shave products, briefly rinse the
shaver warm water before you clean it in
SmartClean.
Caution: Always shake excess water off the
shaver before you place it in the SmartClean
system.
1 Press to open the SmartClean cap, to be able to
place the shaver in the holder ('click').
2 Hold the shaver upside down above the holder.
Make sure the front of the shaver points
towards the SmartClean holder.
1
2
3
3 Place the shaver in the holder (1), tilt the shaver
backwards (2) and press down the top cap to
connect the shaver ('click') (3).
The battery symbol on SmartClean starts to
flash, which indicates that the shaver is
charging.
24 English