34
ENGLISH
MEANING OF THE LIGHT SIGNALS
Control panel display
Light Signals
Causes
Solutions
Steady on
The machine has reached the right temperature and
is now ready:
- For coff ee brewing;
- For hot water dispensing;
- For steam dispensing
Slowly fl ashing
The machine is warming up to brew espresso and
dispense hot water or steam.
Quickly fl ashing
Machine is overheating. Coff ee may not be brewed.
The water must be drained into a container by turning the control dial
clockwise to the
“
”
position until the green ready temperature
light
“ ”
shines steadily. After that, stop dispensing water.
Flashing very
quickly
The machine needs to be descaled.
Start the descaling cycle.
The machine is in the descaling cycle.
If you don’t descale regularly, the machine will stop working
properly. This is not covered by warranty.
Slowly fl ashing
Indicates that the machine is programming the
amount of coff ee to brew .
During the descaling phase the control dial is not in
the correct position.
Bring the control dial back to “ ”.
Steady on
The machine is brewing a double coff ee.
The light is steady on at the beginning of the descaling
cycle.
Prime the circuit and continue the descaling cycle.
Steady on
Low water level.
Fill the water tank with fresh water. After refi lling the water tank,
the indicator light turns off .
Steady on
The coff ee bean hopper is empty.
Fill the coffee bean hopper with coffee beans and start the
procedure again.
The coff ee ground drawer is full.
With the machine turned on, empty the coff ee ground drawer. The
coff ee ground drawer must be emptied after every 8 coff ee cycles. If
the coff ee ground drawer is emptied with the machine turned off , or
when the indicator light is not illuminated, the count of coff ee cycles
is not reset. For this reason, the indicator light to empty the coff ee
ground drawer may illuminate even when it is not full.
