Philips XL590, User Manual

Page: 11 / 48

English
EN
9
Set the country/language
Select your country/language, then press
[OK]
to confirm.
»
The country/language setting is saved.
Note
•
The country/language setting option is country
dependent. If no welcome message is displayed, it
means the country/language setting is preset for your
country. Then you can set the date and time.
To re-set the language, see the following steps.
1
Select
[Menu]
>
[Phone setup]
>
[Language]
, then press
[OK]
to confirm.
2
Select a language, then press
[OK]
to
confirm.
» The setting is saved.
Set the date and time
Tip
•
To set the date and time later, press
[Back]
to skip this
setting.
1
Select
[Menu]
>
[Phone setup]
>
[Date &
time]
, then press
[OK]
to confirm.
2
Press the numeric buttons to enter the
date, then press [OK] to confirm.
»
The time setting menu is displayed on
the handset.
3
Press the numeric buttons to enter the
time.
Note
•
If the time is in 12-hour format, press / to select
[AM]
or
[PM]
.
4
Press
[OK]
to confirm.
Install the handset
The batteries are pre-installed in the handset.
Pull the battery tape off from the battery door
before charging.
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Use only the supplied batteries.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
Note
•
Charge the batteries for 8 hours before first use.
•
If the handset becomes warm when the batteries are
charging, it is normal.
Warning
•
Check the battery polarity when inserting in the
battery compartment. Incorrect polarity may damage
the product.
Configure your phone
(country dependent)
1
When using your phone for the first time,
you see a welcome message.
2
Press
[OK]
.