Philips WI121 series, User Manual

Page: 8 / 40

8
WI11
2.1.0 INSTALLATION
Before unpacking the ProScribe , prepare a suitable workspace. You need a stable and level surface near a grounded wall outlet in
an area that is relatively free of glare from sunlight or other sources of bright light.
While unpacking the ProScribe, inspect it and other package contents for shipping damage that could cause a fire or shock hazard.
Immediately report any shipping damage to the carrier or transportation company and contact customer service for assistance. Keep
all packing material in case you need to ship, store or return the monitor.
After unpacking the ProScribe, make sure the following items are included:
WI121XB
● PAD (512 / 2GB)
● IT-grade AC adapter
● Power Cord set (EU and US cords)
● Battery pack
● Stylus pen
● Hand-carry set
WI121XH
● PAD (512 / ≥ 40GB)
● IT-grade AC adapter
● Power Cord set (EU and US cords)
● Battery pack
● Stylus pen
● Hand-carry set
NOTE:
This user’s manual is available in electronic format only, installed on the PAD and accessible by double click up on the
relevant icon on the desktop
CAUTION:
When moving the PAD from a cold place to a warm one, or vice versa, moisture may condense inside of the PAD or Cradle.
Should this occur, the devices may not operate properly. In such a case an adequate recovery time is necessary to allow the
moisture evaporate (abaut 1hr).