30
31
4.2 Recharge
4.3 Keypad Lock (HOLD Function)
4.4 PC Connection
while the device is connected to a computer, it cannot be
operated manually.
Note
•
• Connect the device with PC through USB cable, as follows.
• Use the exclusive charger to charge the device, as follows.
When using the above methods to recharge, the device will be
in the state of recharging. The battery indicator shows a battery
icon turning from empty to full repeatedly, indicating that the
device is recharging. Under normal circumstance, the device can
be fully recharged in around 3 hours.
The device can be used as a USB mass storage to conveniently
store, back up and move files. Link the device to a computer
with a USB cable. The voice recorder can automatically be
recognized as a mass storage device without the need to install
any software.
1. Slide the POWER button to the lock position to lock all the
buttons on the device, except the slide switch of recording.
Then “Hold” is displayed for a while and then disappears.
2. To unlock buttons, please slide the POWER button down to
OFF.
When moving files into or out of the device, please do not
disconnect the device from the computer.
While the device is connected to a computer, it cannot be
operated manually.
Note
•
•