CH3 CH4
RF OUT
ANT.IN
AUDIO
VIDEO
IN
OUT
IN
OUT
R
L
75
Ω
ANT /
CABLE
OUT
IN
8 Hookups With a Cable Box/Direct Broadcast System
Connections
1
Connect a Cable signal to the IN jack on the Cable Box/DBS.
2
Use an RF coaxial cable (supplied) to connect the OUT jack on
the Cable Box/DBS to the ANT(enna) IN jack on the VCR.
3
Use a second RF coaxial cable to connect the RF OUT jack on the
VCR to the TV’s ANTENNA IN jack.
Recording/Viewing Any Channel
1
With the VCR on and in VCR position (the VCR light will appear
on the display panel), use the CH(annel)
8
/
9
buttons to set the
VCR to the Cable Box/DBS output channel (channel 03 or 04).
2
Set the TV to the same channel to which you set the VCR.
3
Select the channel you want to view/record at the Cable
Box/DBS.
1
2
There are two ways to connect your Cable Box/DBS to the VCR. With this connection:
•
You may view any channel.
•
You must select channels at the Cable Box/DBS. Channels cannot be changed at the VCR.
•
You may not view a channel other than the one you are recording.
•
You may not set up channels at the VCR.
•
You can only program a timer recording for one channel at a time. Set the TV and the VCR to the Cable
Box/DBS output channel (channel 03 or 04), and set your Cable Box/DBS to the channel you want to
record. When you enter the channel you want to record in a timer recording, select channel 03 or 04
(the Cable Box/DBS output channel). (This is step 3 on page 37.) Leave the Cable Box/DBS on for a
timer recording.
3
Cable signal
RF coaxial cable
RF coaxial cable
Cable Box/DBS
VCR
TV’s
ANTENNA
IN jack
VRZ364/VRZ344 4/7/99 8:10 PM Page 8
