Philips VRZ222AT Owner'S Manual Download | Manualshive

Page: 3 / 48

background image

Introduction 3

Features

• High Quality (HQ) System
• Automatic Channel Setup
• On-Screen Displays in English or Spanish
• Display Panel
• Digital Auto Tracking System
• One-Touch Recording
• Timer Recording
• Special Effects Playback: Forward and Reverse Searching; Still
• Remote Control with capability to operate TV
• Repeat Play
• Automatic Operation Features
• Real-Time Counter
• Daylight-Saving Time
• The VCR Plus+ Programming System
• Automatic Head Cleaner

Safety Precautions

Warning: To prevent fire or shock hazard, do not expose
this equipment to rain or moisture.
Federal Communications Commission Warning: Any
unauthorized changes or modifications to this equipment
void the user’s authority to operate it.

This VCR is equipped with a High Quality (HQ) system and is
compatible with existing Video Home System (VHS) equipment.
Philips Consumer Electronics Company recommends that you use
only video cassette tapes that have been tested and inspected for
use in two, four, six, and eight hour VCRs, and which are labeled
with the mark. The use of tapes that have not been inspected
for use in two, four, six, and eight hour VCRs may result in poor
picture quality and excessive deposits on the video heads, which
may not be covered by the warranty if damage occurs.

Note to the Cable TV System Installer: This reminder is
provided to call the Cable TV system installer’s attention to
Article 820-40 of the National Electrical Code, which provides
guidelines for proper grounding – in particular, specifying that the
cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as possible.

Copyright 1998 Philips Consumer Electronics Company. All rights
reserved. VCR Plus+

TM

and PlusCode

®

are trademarks of Gemstar

Development Corporation. The VCR Plus+ Programming system
is manufactured under license from Gemstar Development
Corporation.

Welcome to your VCR owner’s manual.

This manual has six sections: Setting Up Your VCR; Description of Controls; Basic Operations; Recording;
Playing; and Information You May Need. The instructions explain all of the VCR’s features, which are listed
below. You cannot hurt your VCR by trying the features! So read on – and relax.

om

VRZ222 layout 4/8/99 10:18 PM Page 3

«
1
2
3
4
5
...
»

Summary of Contents for VRZ222AT

















































Reviews:

No comments

Related manuals for VRZ222AT

Brand: Memorex Pages: 28

Brand: Zenith Pages: 44

Brand: Zenith Pages: 36

Brand: Zenith Pages: 32

Brand: Audiovox Pages: 30

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 22

Brand: Philips Pages: 32

Brand: Philips Pages: 57

Brand: Philips Pages: 54

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands