• If your DBS does not respond to the
code in steps 6-7, the Controller will
not change channels at the DBS
during a timer recording. In this
case, you must select the channel to
be recorded at the DBS before a
timer recording begins. Enter the
DBS output channel (03 or 04) at
step 3 on page 40. Leave the DBS
on for the timer recording. Details
are on page eight.
Helpful Hint
Setting the Controller to Operate a DBS (cont’d) 49
SELECT CODE NUMBER
OF YOUR DBS RECEIVER
40
DID DBS RECEIVER
CHANGE TO CHANNEL 205?
A
YES
NO
TO CONTINUE PUSH
:
/OK
TO END PUSH EXIT
6
Press the PLAY
8
or STOP
9
button to set the two-digit
code for your DBS (see list below), then press the
FF
:
/OK button.
7
Wait for a few seconds.
•
If the Cable Box changes to channel 205, go to step 8.
•
If the Cable Box doesn’t change to channel 205, press the PLAY
8
or STOP
9
button to select NO, then press the FF
:
/OK
button. Repeat steps 6-7, using a different code for your brand
(if available). If the DBS doesn’t change to channel 205, the
Controller will not operate your DBS. Press the EXIT/STATUS
button. DBS RECEIVER CONTROL IS OFF will appear on the
screen briefly.
8
Press the PLAY
8
or STOP
9
button to select YES, then
press the FF
:
/OK button. “DBS RECEIVER CONTROL IS
ON” will appear for five seconds. “AS A RESULT AUTO CLOCK
WILL BE TURNED OFF” may appear on the screen also.
DBS CODES
MAGNAVOX DBS........................................................42, 43
RCA DBS ................................................................................40
SONY DBS.............................................................................41
7
Wait for a few seconds.
6-8
VCR
TV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
EJECT
CH
VOL
EXIT/STATUS
TIMER
JOG/SHTL
SMARTPICTURE
INDEX
AUDIO/MUTE
MENU
-
+
CBL / DBS
1
2
3
4
5
6
7
8
9
START
STOP
DATE
DBS
DAILY
PLAY
REW
FF
/OK
STOP
WEEKLY
REV
/OTR
REC
REC
FWD
-
+
-
+
SPEED
0
CLEAR
