background image

VAR.SLOW

VCR

TV

CBL/DBS

VOL.

CH.

MUTE

ALT.CH

3

6

9

0

2

5

8

1

4

7

TRACKING

F.ADV

VCR/TV

REC/OTR

POWER

SPEED

STATUS/EXIT

STOP

PLAY

F.FWD

REW

MEMORY

X2 PLAY

SLOW

VCR PLUS+

/ENTER

QUICK

TIME

INDEX

SEARCH

REC END

SKIP

EJECT

MENU

CLEAR

PAUSE/STILL

Read and follow the steps below to record a television program. 

1

Turn on the TV and set it to channel 3 or 4, whichever
channel the CH3/CH4 switch on the back of the VCR is set to.

Recording  31

2

Insert a tape with its record tab intact in the VCR.

4

If the VCR light appears on the display panel, go to step 5. If the
VCR light does not appear, press the VCR/TV button
once.

•  If you press the REC(ord)/OTR but-

ton when there is not a tape in the
VCR, NO CASSETTE will flash on
the screen.

•  If you press the REC(ord)/OTR but-

ton while a tape without a record
tab is in the VCR, the VCR will eject
the tape and PROTECTED CAS-
SETTE CANNOT RECORD will flash
on the screen.

•  Other recording options are on

pages 32-43.

•  You can change the tape speed

during a recording, but some distor-
tion will appear on the tape.

•  The VCR will record in a preset vol-

ume.

Helpful Hints

5

Press the SPEED button until the desired tape speed
appears briefly on the screen. 
(Details about tape speed are on
page 36.)

6

Use the CH(annel) 

o

/

p

button or the Number buttons to

select the channel to be recorded.

7

Press the REC(ord)/OTR button once to start recording.
The Record light will appear.

8

To pause the recording, press the PAUSE/STILL button
once. 
The Record light will flash. To resume recording, press
the REC(ord)/OTR button or press the PAUSE/STILL
button again. 
The Record light will come on again.

9

To stop recording, press the STOP/

p

button.

1

Turn on the TV. 

2

Insert a tape in the VCR.

3

Press the VCR button.

3

7

5

9

6

8

4

Summary of Contents for VRA670AT





































































Reviews: